Landmine Carabiner

Een landmine-accessoirestang waarmee je zelf de handgreepafstand voor rows instelt.

Kensui-landmine-karabijnhaakopzetstuk, lange stang van 72 cm van gepoedercoat staal, voor- en zijaanzicht

Long Kensui Landmine Carabiner Attachment connected to a cable machine with two adjustable handles.

Long Kensui Landmine Carabiner Attachment on a loaded barbell, with two black handles clipped to the outer holes.

Athlete performing a lat pulldown with the long Kensui Landmine Carabiner Attachment and two handles.

Athlete rowing a loaded barbell with wooden handles clipped to the short Kensui Landmine Carabiner Attachment.

Athlete using black handles on the long Kensui Carabiner Attachment suspended from a pull-up bar.

Close-up of wooden handles clipped to the short Kensui Landmine Carabiner Attachment during a loaded barbell row.

Short Kensui Landmine Carabiner Attachment on an unloaded barbell, with wooden handles clipped into its outer holes.

Athlete performing a wide-grip landmine row with the long Kensui Carabiner Attachment and black handles.

Afmetingen en gatdiameters van het korte Kensui-landmine-karabijnhaakopzetstuk van 40 cm in metrische eenheden en inches

Afmetingen en gatdiameters van het lange Kensui-landmine-karabijnhaakopzetstuk van 72 cm in metrische eenheden en inches

Kensui-landmine-karabijnhaakopzetstuk, korte stang van 40 cm van gepoedercoat staal, voor- en zijaanzicht

Athlete performing a seated cable row with the short Kensui Landmine Carabiner Attachment and two handles.

1 / 14

Length: Lang — 72 cm Compare sizes

Model

Vind de greepbreedte die bij je past
Kies een compacte of bredere opstelling
Gebruik je geschikte handgrepen

$49

Op voorraad Verwachte levering binnen 3–5 werkdagen naar US

Gebruik ‘In winkelwagen’ om je gekozen accessoires mee te bestellen.

Minder dan 0,5% van de kopers maakt gebruik van onze geld-terug-garantie.

Gratis verzending $100+

100 dagenZonder risico uitproberen Beoordeeld als Uitstekend4,7/5op Trustpilot

200.000+tevreden klantenklanten

Explore the details

Two bar lengths: 40 / 72 cm
Main opening: 50.8 mm
Attachment holes: 20 / 11.4 mm
Powder-coated finish: Steel

Your barbell. Your grip.

Set your width.
Make it your row.

Bring your handles closer together or spread them wider. Multiple connection points let you build a landmine row around the grip spacing that feels right for you.

Choose a compact 40 cm bar or a wider 72 cm bar.

Built around your setup

More ways to connect.

20 mm + 11.4 mm holes

Clip in where it suits you.

Move compatible carabiners along the bar to change your handle spacing. Two hole sizes give you options for connecting your attachment hardware.

Rows + pulldowns

Take it to the cable station.

Use compatible hardware to connect the bar to a cable machine for pulldowns and seated rows. Keep the handle spacing you prefer across more of your pulling workouts.

Two lengths. One simple choice.

Choose your reach.

Start with the handle spacing you want, then check the dimensions against your equipment.

Compact setup

Short — 40 cm

A straight bar for a compact landmine row setup. Move your handles between the available holes to find your spacing.

15.75 in long · 5 mm steel

Wider setup

Long — 72 cm

More room to spread your handles, with a shallow angled profile and thicker steel.

28.35 in long · 8 mm steel

The details that matter.
Specification	Short	Long
Overall length	40 cm / 15.75 in	72 cm / 28.35 in
Profile	Straight	Shallow angle
Steel thickness	5 mm / 0.20 in	8 mm / 0.31 in
Main opening	50.8 mm / 2.00 in	50.8 mm / 2.00 in
Larger holes, including side opening	20 mm / 0.79 in	20 mm / 0.79 in
Smaller attachment holes	11.4 mm / 0.45 in	11.4 mm / 0.45 in
Finish	Black powder-coated steel	Black powder-coated steel

Check your barbell sleeve and attachment hardware against these opening sizes. Inch conversions are rounded.

Choose your length

A few useful details

Before you train.

Choose your length

Which length should I choose?

Choose Short for a compact, straight 40 cm bar. Choose Long if you want more room to spread your handles across a 72 cm bar. Both have the same opening diameters.

Will it fit my barbell?

Both sizes have a 50.8 mm (2.00 in) main opening. Compare this with your barbell sleeve diameter before choosing your setup.

Can I use it on a cable machine?

Yes. The photos show it connected to a cable machine for lat pulldowns and seated rows. Use compatible carabiners and handles, and check the fit of each connection.

Which handles and carabiners can I use?

Use compatible attachment hardware that fits the 20 mm or 11.4 mm openings. Check both the hole diameter and the steel thickness: 5 mm on Short and 8 mm on Long.

What do I need for the row setup shown?

The photos show a barbell secured in a landmine base, the Carabiner Attachment, compatible handles and carabiners, and weight plates. Check the fit of each connection before training.

De Kensui-belofte

100 Dagen

Geld terug Zonder vragen

De belofte van Kensui

Jouw succes
is gegarandeerd.

We willen dat je je fitnessdoelen bereikt, van het leven geniet en je gezond voelt. Het laatste wat we willen is extra stress veroorzaken — dus als je besluit dat dit niets voor jou is, krijg je zonder gedoe of vragen 100% van je geld terug.